Electrical Connection - Pelgrim CKT8104 Anleitung

INSTALLATION
Installation dimensions
inside the cabinet
x<46 mm: y = 46 mm - x
x>= 46 mm: y = 0 mm

Electrical connection

GB 22
Installation dimensions
The dimensions and recesses are shown in the illustration beneath.
If the hob is wider than the cupboard, with a worktop less than 46 mm
thick, saw a cut-out in both sides of the cupboard, so the appliance is
detached from the cupboard.
600
For the connection, use an approved cable, in accordance with the
regulations. The cable casing should be of rubber. In case of faults,
consult the table on page 19 and 20. There is a label on the underside
of the appliance with the wiring diagrams. The connection terminals are
accessible once you have opened the junction box on the underneath.
The junction box cover can be opened with a screwdriver.
If you want to make a fixed connection, make sure that a multi-polar
switch with a contact separation of at least 3 mm is fitted in the supply
line.
Y
X
Y