INSTALLATION
• 3-phase connection (3L, 230 V ~ / 50 Hz):
▷ The voltage between the phase and the zero is 230 V ~. Fit a
connecting bridge between the connection points 4-5. Your
groups must be fused with at least 16 A (3x). The core diameter
of the connecting cable must be at least 2.5 mm
The bridges on the connecting block can be used to create the required
connections, as indicated in these illustrations.
Fix the cable with a pull relief and close the cover.
Connection point, wall-mounting socket and plug must be accessible
at all times.
2
.
GB 25