Regular Maintenance Performances - JB-Lighting Varycolor 2000 Bedienungsanleitung

Varycolor 2000

Regular Maintenance Performances

Carry-out the following performances every 1 or 2 months. Thereby you will increase sevice life
of your Varycolor 2000 for many years.
Warning: Before opening the appliance pull out mains plug!
Open the casing by turning out the ten screws at the top of your Varycolor.
1. Cleaning of all optical parts
You should clean the optical parts of your Varycolor 2000 periodically to restore maximum
brightness of the varycolor. After having opened the casing as explained above, take a fuzz-
free rag and a detergent for windows and clean the dichroic filters on the colour wheel and the
effectwheel.
Subsequently clean the aspherical lense, which is placed on an additional sheet on the holding
sheet for the motor. In order to clean the lens easily, loosen the screw which fixes the lens and
remove the lens. Now it is easy to clean from the outside and the inside. Put the lens at it's
position again. Do not forget to tighten the screw which fixes the lens.
2. Check of ventilation
Check, if the ventilator and all ventilation shafts are clean. If need be, clean the ventilator and
the ventilation shafts with a brush or use a vacuum cleaner to remove dust.
Guarantee shall not apply to damages caused through pollution!
Now close the casing of your Varycolor 2000.
- 39 -