Standard Version - IARP GRANDLUX 200 Gebrauchs- Und Bedienungs Anleitungen

TEMPERATURE SETTING AND CONTROLS

STANDARD VERSION

Each refrigerating appliance is provided with a thermostat for automatic maintenance of the appropriate
pre-established temperature inside the tank.
This temperature adjuster is gauged by the factory and should not be touched by the user.
Only if the average internal temperature is too cold or not cold enough should the knob (1) turned.
The numbers on the regulation plate are not related to temperature values but only to knob reference
position: a higher number corresponds to a lower temperature.
HGD VERSION
Each refrigerating appliance is provided with a thermostat for automatic maintenance of the appropriate
pre-established temperature inside the tank.
This temperature adjuster is gauged by the factory and should not be touched by the user.
Only if the average internal temperature is too cold or not cold enough should the knob (1) turned.
The numbers on the regulation plate are not related to temperature values but only to knob reference
position: a higher number corresponds to a lower temperature.
STOP
-26-
CONTROLS
1. Thermostat
2. Thermometer
3. Main supply led light:
alight when the cabinet
is connected
4. Light switch
CONTROLS
1. Thermostat
2. Thermometer
3. Main supply led light:
alight when the cabinet
is connected
4. Light switch