Power Supply - Grundig DTR 4500 Benutzerhandbuch

SAFETY ___________________________________
Do not drop the device and do not expo-
se it to liquid, moisture or humidity. These
might lead to damage to the device.
If the device is moved from a cold en-
•
vironment into a warmer one, do let it
adapt to the new temperature before
operate the device. Otherwise, it might
lead to condensation and cause mal-
functions in the device.
Do not use the device in the dust envi-
•
ronment as dust can damage the interior
electronic components and lead to mal-
functions in the device.
Protect the device from strong vibrations
•
and place it on stable surfaces.
Do not attempt to disassembly the de-
•
vice.
If the device is not using for a long
•
period of time, disconnect it from the
power supply by unplugging the power
plug. This is to avoid the risk of fire.
The ventilation should not be impeded
•
by covering the ventilation openings
with items, such as newspapers, table-
cloths, curtains, etc.
No naked flame sources, such as lighted
•
candles, should be placed on the appa-
ratus.
To maintain the compliance with the RF
•
exposure requirement, place the product
at least 20 cm (8 inches) from nearby
persons except when operating the con-
trols.
18 ENGLISH

Power Supply

The socket outlet should
•
be installed near the de-
vice and should be easily
accessible.
Never touch the power plug with wet
•
hands and never pull on the power cable
when pulling the plug out of the power
socket.
This lightning flash with arrowhead sym-
•
bol within an equilateral triangle is in-
tended to alert the user to the presence
of non-insulated "dangerous voltage"
within the product's enclosure that may
be of sufficient magnitude to constitute
a risk of electric shock.
The exclamation point within an equila-
•
teral triangle is intended to alert the user
to the presence of important operating
and maintenance instructions in the lite-
rature accompanying the appliance.
Make sure the electrical voltage spe-
•
cified on the device and its power plug
is corresponding to the voltage of the
power socket. Do not apply excessive or
incorrect voltages to the device, the de-
vice may not function properly and have
an adverse effect on external circuitry.
Furthermore, the device itself may be-
come damaged or burnt.
The device is connected to the mains
•
with the power adaptor. Pull out the
power adaptor when you want to com-
pletely disconnect the device from the
mains.