Connection And Preparation; Connecting The Headphones - Grundig DTR 4500 Benutzerhandbuch

GETTING STARTED ___________________________

Connection and Preparation

Connect to the speaker and power socket using
the AC adaptor. Switch on the device, it starts up.
Connecting an audio source via
AUX in
Use a standard 3.5mm audio cable to connect the
audio output from the external device to the audio
input sockets on the back of the device.

Connecting the headphones

1. Turn the volume down before using the
headphones.
2. Inset the headphone plug (standard 3.5mm) into
the headphone socket at the back of the device.
GENERAL FUNCTIONS _________________________
On the playing screen, rotate the knob or press
» «/» « on the remote control to adjust the
+
volume. Switch off the sound by pressing »
on the remote control.
Press » /MODE« on the device or »MODE« on
the remote control to select modes.
Press and hold »MENU/INFO« or »MENU« on the
remote control to open the menu. Press it again
to close the menu and return to playing screen.
On the menu, rotate the knob or press arrow keys
on the remote control to move along the entries.
Press »OK/SCAN« to confirm; press »ALARM/
BACK« or » « on the remote control to step back.
22 ENGLISH
Press and hold » /MODE« on the device or press
» « on the remote control to switch to standby
« mode. The time, date and any active alarm times
display on the screen.
Press » /MODE« on the device or press » « on
the remote control to wake up from standby.
Presets
Number of presets: DAB+: 40|FM: 40
To store preset, press and hold »PRESET/BTPAIR«
or »« until the display shows the save preset
screen. Select one of the presets to save the
currently playing station.
Store 1-10 preset stations by directly pressing and
hold numbers »1...10/0 « on the remote control.