Grundig DTR 4500 Benutzerhandbuch Seite 25

SYSTEM SETTINGS ___________________________
Sleep
To set the sleep timer, select Sleep under Main
menu. Or press » « on the remote control to set.
Choose from Sleep OFF, 15, 30, 45, 60 or 90 min-
utes and confirm. Once you select a sleep period,
the system returns to the now playing screen.
Alarm
There are two versatile wake-up alarms with
snooze facility. Each alarm can be set to start in a
particular mode.
Select Alarms under Main menu to set or change
an alarm. Alternately, press and hold »ALARM/
BACK« on the device, or press »ALARM« on the
remote control to configure.
For each parameter, press OK to set.
After setup all the parameters, press »ALARM/
BACK« or » « on the remote control to save and.
The screen shows active alarms with an icon at
the bottom left.
At the set time, the alarm will sound. To temporar-
ily silence, press » « on the remote control. You
can change the snooze period. The radio returns to
standby for the set period, with the silenced alarm
icon flashing.
Press » /MODE« or press » « on the remote
control to turn it off.
Equalizer
Several preset EQ modes are available: Normal,
Classic, Jazz, Pop, Rock, Speech and
My EQ. Press »EQ« to select. A user-defined set-
ting is available; create your own EQ under My EQ
Setup, with custom bass, treble and loudness set-
tings. Then choose My EQ to activate the custom-
ized EQ settings.
Time/Date
Set the time manually or auto update, time format,
time zone.
Set Time/Date: set the date and time manually.
Auto Update: from any (the system gets the time
from DAB station or FM stations with RDS), from
Digital Radio, from FM or No Update
Set 12/24 Hour: Select 12 Hour display format or
24 Hour display format. If you select the
12-hour format, the display shows "AM" in the
morning or "PM" in the afternoon after the time.
Set Date Format: Select DD-MM-YYY or MM-DD-
YYYY as date display.
Backlight
You may change the power-on backlight level to
High, Medium or Low. And adjust the timeout du-
ration which the radio turns to standby backlight
level when it has not been controlled.
Language
Change it as your preference.
Factory Reset
Resetting all user settings to default values, so that
time and date, network configuration and presets
are lost. However, current software version of the
radio is maintained.
Software Update
For service purpose.
Software Version
View the firmware version.
ENGLISH 25