Grundig DTR 4500 Benutzerhandbuch Seite 24

MAIN OPERATION ____________________________
FM Radio
FM radio mode receives analogue radio from the
FM band and displays RDS (Radio Data System)
information about the station and where broadcast.
The first time you select FM radio mode, or if the
station list is empty, the device will run auto scan
and save the stations to the preset list.
To find a station, press »OK/SCAN«. The frequency
display starts to run up as the device scans the FM
band. Alternatively, you can scan up or down by
press and hold »TUNING - « or »TUNING + «.
Settings
• Scan to Preset: Run the auto scan function once,
the stations will be saved to preset.
• Scan settings: By default, FM scans strong stati-
ons only. stop at any available station. To change
the scan settings to stop at the stations with
weak signal strength, choose all stations.
• Audio settings: All stereo stations are reprodu-
ced in stereo. For weak stations, this may result
in a poor signal-to-noise ratio (hiss), choose to
forced mono.
Bluetooth
In Bluetooth mode, you can turn on the Bluetooth of
your Bluetooth device. From your Bluetooth device,
search the device Grundig DTR 4500 to pairing. If
the pairing is successful, it displays Connected on
the screen. Control the music playback from your
Bluetooth device.
24 ENGLISH
AUX
In AUX in mode plays audio from an external
source. Turn the volume low on both the radio and,
if adjustable, the audio source device. Enter AUX
mode, then adjust the volume as required.