Power Supply; Mains Operation - Grundig DTR 6000 2.1 BT DAB+ WEB Bedienungsanleitung

SAFETY­AND­INFORMATION
Packaging materials of the product are
manufactured from recyclable materi-
als in accordance with our National
Environment Regulations. Do not dis-
pose of the packaging materials together with the
domestic or other wastes. Take them to the pack-
aging material collection points designated by
the local authorities.
The lightning flash represented by the
arrow symbol in an equilateral triangle
is intended to alert users to the pres-
ence of the high voltage within the de-
vice which could cause an electric shock.
This equipment is a class II or double
insulated electrical appliance. It has
been designed in such a way that it
does not require a safety connection to
electrical earth.
POWER­SUPPLY
Mains­operation
Check that the mains voltage on the type plate
(on the back of the device) corresponds to your
local mains supply. If this is not the case, contact
your specialist dealer.
1
Plug Adapter DC connector in the DC IN sock-
et on the device.
2 Plug Adapter AC connector into the socket
(100 - 240 V ~ , 50/60 Hz).
Caution:
The device is connected to the mains with
7
the power cable. Pull out the power cable
when you want to completely disconnect the
device from the mains.
Unplug the mains plug to disconnect the de-
vice from the mains. Make sure the power
plug is easily accessible during operation
and not hindered by other objects.
The mains plug or appliance coupler is used
7
as disconnect device, the disconnect device
shall remain readily operable.
­----------------------------------------------------------------------------------------------------------------
­----------------------------------------------------------------
Please read the entire manual
carefully before operating this
device.
ENGLISH
27­ ­