Now Playing Information; First-Time Setup; Scanning For Stations - Grundig DTR 4500 Benutzerhandbuch

GENERAL FUNCTIONS _________________________
To play a preset, press »PRESET/BTPAIR« or» « ,
then select one of the listed preset stations. When
a preset station is playing, it shows n ( 1, 2 etc) at
the bottom of the screen. Recall 1-10 preset sta-
tions by directly pressing the number keys on the
remote control.

Now playing information

While stream/DAB/FM is playing, the screen shows
some information about the station, press »MENU/
INFO« or »INFO« to view.
MAIN OPERATION ____________________________
DAB+ Radio
DAB mode receives DAB/DAB+ digital radio and
displays information about the station, stream and
track playing.

Scanning for stations

The first time you select DAB radio mode, or if
the station list is empty, the radio automatically
performs a full scan to see what stations are
available. You may also need to start a scan
manually to update the list of stations.
To start a scan manually, choose Full scan. To scan
only stations with good signal strength, select
Local scan. Once the scan is complete, the radio
shows a list of available stations.
To remove stations that are listed but not
unavailable, choose Prune invalid. Turn the
navigate reel to view a list of stations and press
When the device is overloaded
The device may process large amount of data after
a period of operation, no matter in which mode,
it will cause the system freeze or malfunction.
Reboot the device if necessary.

First-time Setup

When powering the device on for the first time,
it enters DAB mode and automatically scans the
stations.
to select.
Once selected, the station plays and the screen
show information about station, track or show as
broadcast.
On the playing screen, press »ALARM/BACK« or
» « on the remote control to view the station list.
When the slideshow is displayed on the playing
screen, press »OK/SCAN« to view the full screen
size of the picture.
Settings
• Prune invalid: Enter To remove stations that li-
sted but unavailable.
• Dynamic range compression (DRC): If you are
listening to music with a high dynamic range in
a noisy environment, you may wish to compress
the audio dynamic range. This makes quiet
sounds louder, and loud sounds quieter. You can
change DRC as off, low or high.
• Station order: You can choose the order of the
DAB station list to be either Alphanumeric,
Ensemble or Valid. Ensemble lists groups of
stations that are broadcast together on the
same ensemble. Valid lists valid stations first,
alphanumerically, then off-air stations.
ENGLISH 23