Before Start Of Operation; Insert / Replace Battery - Powerfix 306877 Bedienungs- Und Sicherheitshinweise

¡ ¡
burns on contact with the skin. Wear
suitable protective gloves at all times if
such an event occurs.
In the event of a battery leak,
¡ ¡
immediately remove it from the product
to prevent damage.
Remove the batteries/rechargeable
¡ ¡
batteries if the product will not be used
for a longer period.
Risk of damage of the product
Only use the specified type of battery /
¡ ¡
rechargeable battery!
When inserting ensure the correct
¡ ¡
polarity! This is shown inside the battery
compartment!
Clean the contacts on the battery and
¡ ¡
in the battery compartment before
inserting!
Remove exhausted batteries /
¡ ¡
rechargeable batteries from the product
immediately.
˜ Before start of operation
˜ Insert / replace battery (see Figure B)
Tip: Flashing numbers indicate a discharged / flat battery.
Tip: When changing the battery, the LCD display 5 may
experience faults. Remove the battery and insert it again after
waiting more then 30 seconds.
Push open the lid to the battery compartment 8
¡ ¡
(see Fig. B).
Remove the old battery.
¡ ¡
Insert the new battery into the battery compartment and
¡ ¡
ensure correct polarity (+ and –). Make sure that the plus
terminal points outwards.
Push the lid to the battery compartment 8 shut again
¡ ¡
(see Fig. B).
WEAR PROTECTIVE GLOVES!
Leaked or damaged batteries /
rechargeable batteries can cause
GB/MT 39