Troubleshooting; Maintenance/Cleaning; Maintenance; Cleaning - Silvercrest SHLS 1800 A1 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SHLS 1800 A1

10. Troubleshooting

The fan heater is not working
•
Check that the mains plug is correctly inserted into the mains socket.
•
Check whether the mains socket is live. If necessary, check the house fusebox.
•
Check if the On/Off switch (10) is switched on.
The fan heater is not heating
•
Check whether the fan heater is upright and the safety switch (5) is activated.
•
Check whether the fan heater is in fan mode.
•
The internal overheating protection has been triggered. Allow the fan heater to cool and check
that the air inlet grille (12) and the air outlet grill (3) are free.
•
The heating element is faulty. Contact customer service.
Cannot control the unit using the remote control
•
Point the remote control infrared transmitter (17) directly at the fan heater. Make sure there are
no obstacles between the remote control and the fan heater.
•
The distance between the fan heater and the remote control could be too great. Reduce the
distance.
•
The remote control battery is empty. Insert a new CR2032 3V battery.

11. Maintenance/cleaning

11.1 Maintenance

Servicing is required if the fan heater has been damaged in any way, for example, if
liquid has entered the product, if the fan heater has been exposed to rain or moisture, if
the fan heater is not working normally or if the product has been dropped. If you notice
any smoke, unusual noises or strange smells, switch off the fan heater immediately and
remove the mains plug from the mains socket. If this occurs, the fan heater should not be
used before it has been inspected by authorised service personnel. All repairs must be
carried out by qualified service personnel. Never open the housing on the fan heater.

11.2 Cleaning

DANGER! Unplug the mains plug from the mains socket before you start to clean, there
is the risk of electric shock!
DANGER! Wait until the fan heater has cooled down. Otherwise there is risk of burn
injury!
Clean the fan heater at regular intervals. To clean the fan heater, use a slightly damp cloth. Never
use any solvents or cleaners that may damage the plastic.
If the air inlet grille (12) or the air outlet grille (3) of the fan heater get dirty, you can also clean
them with a vacuum cleaner.
38 - English