Silvercrest SHLS 1800 A1 Bedienungsanleitung Und Sicherheitshinweise Seite 33

• If the fan heater falls into water, unplug the mains plug
immediately and only then remove the fan heater from the
water.
• To disconnect properly from the mains, the mains plug must
be pulled out of the socket. Never pull on the power cable
(9) to remove the mains plug from the mains socket. Always
pull on the mains plug itself.
• Unplug the mains plug from the mains socket if the fan heater
is not working properly, not in use, during thunderstorms and
before cleaning.
• Make sure that the power cable (9) cannot be damaged by
sharp edges or hot spots.
• Make sure that the power cable (9) cannot become crushed
or squashed.
• Do not modify the fan heater in any way.
• If the power cable (9) is damaged, it must be replaced by
the manufacturer, its customer service or a similarly qualified
person, in order to avoid any possible danger. Never use
adapter plugs or extension cables and do not tamper with
the power cable (9)!
Risk of fire!
• Always place the fan heater on an even, heat-resistant
surface away from heat sources and combustible materials,
liquids or gases. Leave clearance of at least 1 m on all sides.
• The fan heater is not designed to be operated with an
external timer or a separate remote control system.
SilverCrest SHLS 1800 A1
English - 31