Storage; Disposal; Troubleshooting; Malfunction Causes And Remedies - Silvercrest LHL 2000 B1 BL Bedienungsanleitung

Storage

GB
CY
■
■

Disposal

Troubleshooting

Malfunction causes and remedies

Defect
The appliance
will not switch
on
The appliance
is not provid-
ing heat.
10
Disconnect the mains power plug if you do not intend to use the appliance for an
extended period of time.
Store the appliance in a dry environment.
Do not dispose of this appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU WEEE (Waste Electrical and Electronic Equipment)
Dispose of the appliance through an approved disposal centre or at your com-
munity waste facility. Observe the currently applicable regulations. In case of
doubt, please contact your waste disposal centre.
In this chapter you will receive important information for malfunction localisation
and remedies.
WARNING
Observe the following safety information to avoid risks and property damage:
► Repairs to electrical appliances may only be carried out by specialists who
have been trained by the manufacturer. Considerable risks for the user and
damage to the appliance can occur as a result of incompetent repairs.
The following table will help with localising and eliminating minor malfunctions:
Possible cause
The plug is not connected.
The mains power socket is not
providing power
Operating switch
switched on.
Temperature regulator
MIN position.
The heating element is defective.
NOTICE
► If you cannot solve the problem with the aforementioned methods please
contact customer service.
Solution
Connect the plug with a mains power
socket.
Check the house fuses
4 is not Set the operating switch
desired mode.
6 is at the Set the temperature regulator
at the MAX position
Get in touch with Customer Services.
4 at the
6
LHL 2000 B1