Precautions For Safety - Toshiba VN-M150HE Bedienungsanleitung

 Warning indications on the Air to Air Heat Exchanger
Warning indication
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect all remote
electric power supplies
before servicing.
WARNING
Moving parts.
Do not operate unit with
inspection cover removed.
Stop the unit before the servicing.
CAUTION
High temperature parts.
You might get burned
when removing this cover.
3-EN
Description
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect all remote electric power supplies before servicing.
WARNING
Moving parts.
Do not operate unit with inspection cover removed.
Stop the unit before the servicing.
CAUTION
High temperature parts.
You might get burned when removing this cover.
1

Precautions for safety

The manufacturer shall not assume any liability for the damage caused by not observing the
description of this manual.
WARNING
General
• Carefully read Owner's Manual before starting the Air to Air Heat Exchanger. There are many
important things to keep in mind for daily operation.
• Ask for installation to be performed by the dealer or a professional. Only a qualified installer
(*1) is able to install an Air to Air Heat Exchanger. If a non-qualified person installs an Air to
Air Heat Exchanger, it may result in problems such as fire, electric shock, injury, water
leakage, noise and vibration.
Transportation and storage
• When transporting the Air to Air Heat Exchanger, wear shoes with protective toe caps,
protective gloves, and other protective clothing.
• When transporting the Air to Air Heat Exchanger, do not take hold of the bands around the
packing carton. You may injure yourself if the bands should break.
• When stacking the packing cartons for storage or transportation, heed the precautions
written on the packing cartons. Failure to heed the precautions may cause the stack to
collapse.
• The Air to Air Heat Exchanger should be transported in stable condition. If any part of the
product broken, contact your dealer.
• Use a hand track or forklift to carry the unit. When carrying it by human power, have four
persons or more (VN-M150 to 1000HE) eight persons or more (VN-M1500 and 2000HE);
otherwise, you may strain your back.
Installation
• Only a qualified installer(*1) or qualified service person(*1) is allowed to carry out the
electrical work of the Air to Air Heat Exchanger. Under no circumstances must this work be
done by an unqualified individual since failure to carry out the work properly may result in
electric shocks and/or electrical leaks.
• After the installation work has been completed, have the installer explain about the circuit
breaker positions. In the event that trouble has occurred in the Air to Air Heat Exchanger, set
the circuit breaker to the OFF position, and contact a service person.
• Do not install the Air to Air Heat Exchanger in a location that may be subject to a risk of
exposure to a combustible gas. If a combustible gas leaks and becomes concentrated
around the unit, a fire may occur.
• Use the company-specified products for the separately purchased parts. Use of non-
specified products may result in fire, electric shock, water leakage or other trouble. Have the
installation performed by a professional.
• Confirm that earthing is performed correctly.
– 2 –
EN
4-EN