Using Your Appliance; How To Set / Change The Time; Stop Turntable Option - Atag MC 4111 L Bedienungsanleitung

how to set / change the time

After connecting your appliance or after a prolonged power failure, 0 0 0 0 : : 0 0 0 0 flashes in the
display.
To set the clock
Press the -/+ keys to set the time, ex. 6:30.
Confirm by pressing START/STOP or the CLOCK key.
/
A beep confirms that your clock is set.
When there is a time change
Press the CLOCK key. The time display flashes.
Programme the new time (ex. 7:30) by pressing the + key.
Confirm by pressing START/STOP or the CLOCK key.
/
A beep confirms that your clock is set to the new time.
Comments:
I f you do not press the clock key, the time displayed is automatically recorded
after one minute.
Your appliance is equipped with a back-up so that during a power failure
the time remains displayed for a day and the memories are retained.
To dim the display, press the clock key for 5 seconds. Only the backlight will
remain lit.
Press again for 5 seconds to light the display up again .

stop turntable option

If you think there is insufficient space for the dish to turn freely inside the oven, set
the STOP TURNTABLE function before or during the programme.
Note : it is not possible to stop the turntable during an automatic defrost programme.
To set:
Press the STOP TURNTABLE key, the
stops.
To cancel:
To cancel the function, follow the same procedure.
It is necessary to turn the container or stir the contents halfway through the
programme when the STOP TURNTABLE function is set.

using your appliance

symbol lights up and the turntable
Display
Display
99