Operation; Selecting Your Function; Function Settings Mode - Atag CX46D Serie Bedienungsanleitung

OPERATION

Selecting your function

Function settings mode

EN 14
Select a function appropriate for the meal you are cooking. Consult the
table in chapter 'Functions table' to see which functions are available.
• Go directly to the progress mode by pressing the confirm key (this
key is blinking if it is possible to start the program).
After you have chosen a main function, the function settings mode is
active (grey background). In this activated area, it is now possible to
change the settings in this funtion.
Example (Oven/Hot air + bottom heat/40 minutes)
1. Choose a main function by turning the function knob.
The first sub-function setting is active.
OVEN l HOT AIR
Now the settings can be changed as desired. There is the possibility to
set:
• The function (consult the table in chapter 'Functions table').
• The temperature.
• The power.
• The time.
2. Turn the selection knob and change the setting.
OVEN l HOT AIR + BOTTOM HEAT
3. Confirm the setting by pressing the right navigation key or by
pressing the selection knob.
The next sub-function setting becomes active.
OVEN l TEMPERATURE
180
°C
200
°C
195
200 200
°C °C
205
14:30
14:30
14:30