Trouble-Shooting Guide - Atag MC 4111 L Bedienungsanleitung

trouble-shooting guide

If you have a query concerning the operation of your appliance, this does not neces-
sarily mean that there is a breakdown. In all events, check the following points:
You notice that
The time is counting down but the appli-
ance is not functioning ( the food is not
demo
heated) and " " flashes in the display.
The appliance does not switch on.
The appliance continues to make a noise
after cooking has finished.
The appliance is noisy.
The turntable does not revolve properly.
You notice steam on the glass.
The food is not heated in the microwave
programme.
Smoke comes off the grill at the start
of the programme.
The appliance produces sparks.
116
Solution
Demonstration mode has been set. To
switch back into operating mode, press the
following three keys all at the same time :
Check that the appliance is properly con-
nected.
Check that the oven door is properly
closed.
Check that the child lock feature is not
programmed.
In order to evacuate residual steam, your
appliance is equipped with a delayed ven-
tilation feature. According to the cooking
mode chosen (solo/grill/combined), the
ventilation may continue to function after
the end of the programme.
Clean the rollers and the roller area under
the turntable.
Check that the rollers are correctly posi-
tioned.
Wipe off the condensation with a cloth.
Check that the utensils are suitable for
use with microwave ovens and that the
power level is appropriate.
Remove all cooking residues from the
heating element before each use.
Clean the appliance thoroughly: remove
grease, cooking particles, etc.
Make sure no metal objects are close to
the oven walls.
Never use metal objects with the grill.
Never operate your oven when it is empty.