Troubleshooting - Scheppach HDW70 Originalbetriebsanleitung

Cleaning the main filter unit (Fig.10, 11, 12)
Unlock the clamps (19) at both sides and remove the
1.
main filter unit (20).
Open the locks (21) and open the flap (22). Clean the
2.
inside of the main filter with a brush.
Remove the filter (23) and clean it.
3.
Trouble shooting
Error
The device switches off
during wet vacuuming
Loss of suction power
Dust escapes from the de-
vice during vacuuming
14 GB
Possible cause
The tank is too full
The filters are blocked or installed incorrectly
Remedy
Empty the tank
Clean or replace the filter elements and
the filter bag. Also make sure that they are
installed correctly.