Handicare SEDEO Bedienungsanleitung Seite 19

Legrest width
1. Remove the calfstrap.
2. Loosen the setscrews (C) a few
turns with a 4 mm Allen key.
3. Place the legrests (D) in the
desired position.
4. Tighten the setscrews (C) securely.
Legrest depth (option)
1. Loosen the Allen bolt (A) a few
turns with a 5 mm Allen key.
2. Slide the legrest bracket (B) in the
desired position.
3. Tighten the Allen bolt (A) securely.
•
Make sure that the castor wheels
do not touch the footplates when
manoeuvring. If this is the case,
the legrests must be brought
forward. There must be at least 1
cm between the castor wheels
and the footplates.
•
Make sure the suspension
bracket does not push into the
back of the knees causing
discomfort. If this is the case,
the seat must be adjusted
forward.
Footplate angle
1. Loosen the Allen bolt (C) a few
turns with a 6 mm Allen key, so
that the teeth of the hinge come
completely free.
2. Adjust the desired footplate angle
(D) and push the hinge manually
together again.
3. Tighten the Allen bolt (C) securely.
Downloaded from www.Manualslib.com manuals search engine
Adjustment options
19