Motion Detection - Santec SPVM-20AC Bedienungsanleitung

5.4.9 H/V reverse
This is used to select the image in horizontal or vertical reverse display.
H-REVERSE:
V-REVERSE:
After the setting has been completed, press [ENT] to save the adjustments. After that press
the [PRI] key to go back to the main menu page.

5.4.10 Motion detection

This is used to select the montion dection function.
OFF:
ON:
AREA:
TIME:
SENS:
After the setting has been completed, press [ENT] to save the adjustments. After that press
the [PRI] key to go back to the main menu page.
_________________________________________________________________________________
Downloaded from www.Manualslib.com
Horizontal reverse (mirror) ON/OFF
Vertical reverse (up-side down) ON/OFF
Motion detection function is OFF.
Motion detect function is ON.
At the this mode, you can select the motion detection area.Use the [UP] and
[DOWN] keys to move the gray block to the detection position. Press the [ENT] key
to set the position. Repeat the operation untill all detection positions are masked
by a gray block. Press the [PRI] key to quit this setting.
Select the motion detection output time.
Motion detection sensitive adjustment.
manuals search engine
Bedienungsanleitung / User Manual SPVM-20AC / SPVM-26AC / SPVM-32AC
- 64 -