Santec SPVM-20AC Bedienungsanleitung Seite 61

Bedienungsanleitung / User Manual SPVM-20AC / SPVM-26AC / SPVM-32AC
5.4.3 AGC/Sens
This is used to select AGC and SENS function.
AGC:
Sens:
After the setting has been completed, press [ENT] to save the adjustments. After that press
the [PRI] key to go back to the main menu page.
5.4.4 BLC (Backlight compensation)
This is used to control BLC (Backlight Compensation).
BLC:
AREA:
After the setting has been completed, press [ENT] to save the adjustments. After that press
the [PRI] key to go back to the main menu page.
_________________________________________________________________________________
Downloaded from www.Manualslib.com
To adjust the auto gain control function, the following can be selected: [AUTO] or
[FIX] in 9 adjustable steps.
For low light applications, the following can be selected: [AUTO] or [OFF].
9 adjustable steps at AUTO mode.
ON / OFF selection. If you select [ON] there is a sub-items [AREA] available.
48 BLC zones can be set separately. Based on the mask area (BLC zone), you
can select the iris level and shutter speed.
manuals search engine
- 61 -