Motion Detection - Santec SPVM-20ACM Bedienungsanleitung

Bedienungsanleitung / User Manual SPVM-20ACM / SPVM-26ACM / SPVM-32ACM
7.4.9 H/V reverse
This is used to select the image in horizontal or vertical reverse display.
H-REVERSE: Horizontal reverse (mirror) ON/OFF
V-REVERSE: Vertical reverse (up-side down) ON/OFF
After the setting has been completed, press the [LEFT] button to save the adjustments and to
exit.

7.4.10 Motion detection

This is used to select the montion dection function.
OFF: Motion detection function is OFF.
ON: Motion detect function is ON.
AREA: At this mode, you can select the motion detection area. Use the [UP] and [DOWN]
keys to move the gray block to the detection position. Press the [RIGHT] key to set
the position. Repeat the operation untill all detection positions are masked by a
gray block. Press the [LEFT] key to quit this setting.
TIME: Select the motion detection output time.
SENS: Motion detection sensitive adjustment.
After the setting has been completed, press the [LEFT] button to save the adjustments and to
exit.
_________________________________________________________________________________
- 69 -