Safety Instructions - Santec SPVM-20AC Bedienungsanleitung

Bedienungsanleitung / User Manual SPVM-20AC / SPVM-26AC / SPVM-32AC

Safety instructions


Before operating the unit, please read this manual carefully and retain it for further reference.

Before cleaning the unit, it has to be switched off and unplugged from the power outlet. Wipe the
unit with a soft damp cloth.
Do not use harsh cleansers or aerosols for cleaning. The type label may not be replaced.

Do not use attachments unless recommended by the manufacturer as they may affect the
functionality of the unit and result in the risk of fire, electric shock or injury.

Never install the unit in areas exposed to water or other liquids.

The unit has to be installed in a safe and stable location according to the instructions of the
manufacturer. Be careful when moving heavy equipment. Quick stops, excessive force, and
uneven surfaces may cause the unit to fall causing serious injury to persons and damage to
objects.

Openings in the unit, if any, are provided for ventilation to ensure reliable operation of the unit and
to protect if from overheating. These openings must not be covered or blocked. Please make sure
that the unit does not overheat.

The unit should only be operated from the type of power source indicated on the marking label. If
you are not sure of the type of power supplied at the installation location, please contact your local
dealer.

A unit which is powered through a polarized plug (a plug with one blade wider than the other) will
fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug
into the outlet, try reversing the plug. Do not defeat the safety purpose of the polarized plug.

If the unit is powered through a grounding-type plug, the plug will only fit into a grounding-type
power outlet. This is a safety feature. If your outlet does not have the grounding plug receptacle,
contact your local electrician.

Route power cords and cables in a way to protect them from damage by being walked on or
pinched by items places upon or against them.

To protect the unit during a lightning storm or when it is left unattended and unused for a longer
period, unplug the unit from the wall outlet. Disconnect any antennas or cable systems that may
be connected to the unit. This will prevent damage to the unit due to lightning or power-line
surges.

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric
shock.

Never insert items into the openings of the unit. They may touch parts under electric current which
may cause an electric shock.

Never pour any liquids over the unit.
_________________________________________________________________________________
Downloaded from www.Manualslib.com manuals search engine
- 41 -