White Balance - Santec SPVM-20AC Bedienungsanleitung

5.4.5 White balance

This is used to control the colour ON/OFF and white balance and the gain rate of RED &
BLUE colour.
COLOR:
WB:
GAIN:
After the setting has been completed, press [ENT] to save the adjustments. After that press
the [PRI] key to go back to the main menu page.
5.4.6 Gamma/Enhance
This is used to select the camera gamma correction.
GAMMA:
ENHANCE: Adjust the enhance level.
After the setting has been completed, press [ENT] to save the adjustments. After that press
the [PRI] key to go back to the main menu page.
_________________________________________________________________________________
Downloaded from www.Manualslib.com
Select the following: OFF is for monochrome image, ON is for normal colour
image, AUTO is for low light conditions. If you set AGC up, the display image will
be change automatically to monochrome image.
White balance control. ATW = Auto Trace White Balance
Move the arrow from ATW to AWB and it will lock the current colour temperature.
The gain rate of R-Y and B-Y can be adjusted separately.
Select: TYPE-1 gamma is 0.45, TYPE-2 gamma is 1.0
manuals search engine
Bedienungsanleitung / User Manual SPVM-20AC / SPVM-26AC / SPVM-32AC
- 62 -