Digital Output - Santec SPVM-20AC Bedienungsanleitung

Bedienungsanleitung / User Manual SPVM-20AC / SPVM-26AC / SPVM-32AC
5.4.15 Positive/Negative
This is used to select the image to be displayed in a positive and negative way
OFF:
ON:
After the setting has been completed, press [ENT] to save the adjustments. After that press
the [PRI] key to go back to the main menu page.

5.4.16 Digital output

This is used to select the digital output format.
FORMAT:
CLOCK:
DATA:
After the setting has been completed, press [ENT] to save the adjustments. After that press
the [PRI] key to go back to the main menu page.
_________________________________________________________________________________
Downloaded from www.Manualslib.com
Image display is a normal (=positive) image.
Image display is a negative image.
Select the digital output format to [YUV4.2.2] or [ITU656].
Select the digital output clock to positive or negative.
Select the digital output data sequency to [UYUV] or [VYUY] or [YUYV] or
[YVYU].
manuals search engine
- 67 -