White Balance - Santec SPVM-20ACM Bedienungsanleitung

Bedienungsanleitung / User Manual SPVM-20ACM / SPVM-26ACM / SPVM-32ACM

7.4.5 White balance

This is used to control the colour ON/OFF and white balance and the gain rate of RED &
BLUE colour.
COLOR: Select the following: OFF is for monochrome image, ON is for normal colour
image, AUTO is for low light conditions. If you set AGC up, the display image will
be change automatically to monochrome image.
WB: White balance control. ATW = Auto Trace White Balance
Move the arrow from ATW to AWB and it will lock the current colour temperature.
GAIN: The gain rate of R-Y and B-Y can be adjusted separately.
After the setting has been completed, press the [LEFT] button to save the adjustments and to
exit.
7.4.6 Gamma/Enhance
This is used to select the camera gamma correction.
GAMMA: Select: TYPE-1 gamma is 0.45, TYPE-2 gamma is 1.0
ENHANCE: Adjust the enhance level.
After the setting has been completed, press the [LEFT] button to save the adjustments and to
exit.
_________________________________________________________________________________
- 67 -