Mounting The Box - Intermediate Screen - Renson Fixscreen Minimal Curtain wall 50 Montageanleitung

Fixscreen
en
3.3 • Mounting the box - Intermediate screen
1
25
Width
start screen
The intermediate screen is always located between the start
screen (left side) and the stop screen (right side).
This screen is, as it were, connected to the start screen.
Industriezone "Flanders field"
8790 Waregem (Belgium)
Tel. 056/62.71.11 Fax. 056/60.28.51
3
Now position the box above
the fixed profiles of the
coupling side channel C.50.
6
Continue to support the box until the side consoles are screwed in place.
The right hand side console of the box must always be secured in place. This is identical to the
securing of the box on a start screen.
26
Minimal Curtain wall 50
®
Width
intermediate screen stop screen
4
Use an Allen key (2.5) to
remove the mounting pin
from the side channel, and
slide it into the box, in the
recess provided for this
purpose.
2
Slide the intermediate screen
box over the 3 pins of the
25
Width
start screen.
Formaat
A3
5
Then re-tighten the mounting
pin. The box is now aligned
with the coupling side
channel.