Medtronic MiniMed Mio Advance Gebrauchsanweisung Seite 9

housing steady. Then, push the site connector
into the cannula housing until it clicks.
Removing
1. Wash hands with soap and water.
2. Use one finger to gently hold the cannula
housing steady. Then (a) squeeze the sides
of the site connector and (b) pull the site
connector out of the cannula housing.
3. Disconnect the tubing from the pump and
remove the tubing connector from the reservoir
by turning the connector counter-clockwise.
For specific instructions to disconnect tubing
from the pump, refer to the pump user guide.
4. Carefully lift the adhesive around the cannula
housing. Then, pull the soft cannula out of
the skin.
5