Operation By Switch; Led-Status-Display - GUTMANN Llano EM 32 Bedienungsanleitung

2. Operation via switch
The buttons for the emergency operation of the hood are located on the unit on the right
of the twoside bars. ( Not all functions are available )
Button
Push
1
1x
1
1x long
1
1x
2
> 5 sec.
2
1x
3
1x
+
3
1x
3
4x
_
4
2
> 3 sec.

LED-status-display

(a) ON
 Overrun (LED flashes)
Level 1

Level 2

Level 3

Intensive Level 4

(f) Filter satur-

ation indicator
LED a: Display operating status ON / OFF
LED a: Flashing: display automatic follow-up time
( the hood switches automatically within a short time one power stage at a time
down to final shutdown )
LED 1: Fan power stage 1 ( low motor power )
Press button right / button 2 of the remote control once.
LED 2: Fan power stage 2 ( average motor power )
Right button / Press button 2 of the remote control twice
LED 3: Fan power stage 3 ( high motor power )
Press button right / button 2 of the remote control three times.
LED 4: Flashes Intensive level ( motor automatically switches back to level 3 after 5 min )
Press the right button four times / Press button 3 on the remote control.
LED f: Display filter saturation
When the red LED lights up, the metal filters must be cleaned ( see section
cleaning and care ) .
The filter saturation indicator lights up after max. 15 hours of operation . ( even
when not cooking ) -
Device has to be active - an-motor first has to be switched off. ????
OPERATING INSTRUCTIONS
Pressing and holding button (b) will start the color change ( 2700 -
6500K ) and the last value will also be stored when released.
( only available when the engine is stopped )
Fan power increases to intensive level
Motor automatically switches back to level 3 after 5 minutes.
green LED
green LED
green LED
green LED
green LED
red LED
push button (2) about 10 seconds for reset.
Execution
Lighting ON
Lighting dimmer-funktion
Lighting OFF
Colour temperature adjustment
Fan ON Motor runs at level 1
Fan speed increases to level 2
Fan speed increases to level 3
Fan speed is reduced
Motor switches off
EN
21