Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Unscrew the screw at battery compartment and remove it.
3. Remove the cover by unscrewing the 4 screws and pulling off
the meter's cover.
4. Remove the PCB by unscrewing the 4 screws at each corner.
5. Install the new fuse in the fuse compartment.
6. Replace the PCB and secure it with the screws.
7. Replace the cover and secure it with the screws.
8. Replace the battery compartment and secure it with the screw.
All rights, also for translation, reprinting and copy of this manual or
parts are reserved.
Reproduction of all kinds (photocopy, microfilm or other) only by
written permission of the publisher.
This manual considers the latest technical knowing. Technical
alterations reserved.
We herewith confirm, that the units are calibrated by the factory
according to the specifications as per the technical specifications.
We recommend to calibrate the unit again, after 1 year.
®
© PeakTech
10/2013/Pt.
PeakTech Prüf- und Messtechnik GmbH - Kornkamp 32 –
DE-22926 Ahrensburg / Germany
+49-(0) 4102-42343/44 +49-(0) 4102-434 16
info@peaktech.de
www.peaktech.de
Downloaded from
www.Manualslib.com
manuals search engine
Werbung
Inhaltsverzeichnis
