Klarstein Valeria Brilliant Bedienungsanleitung Seite 27

After setting the hour, press the TIMER button
Now the minute digit [00] flashes in the display. Press the FAN button
the minute value in 1-minute steps from [01] to [59] with each press of the button. When
the display shows [59], pressing the FAN button
Press the LIGHT button
with each press of the button. When the display shows [00], pressing the LIGHT button
does not change the minute display. After setting hour and minute, press the TIMER
button to confirm.
(5) Setting the off-delay timer
When the FAN button
function. The delay timer function allows you to set the hoods automatically power off
according to the delay timer you set from 1 minute to 60 minutes.
Press the TIMER button
[05:00]. Press the FAN button
1-minute steps from [05:00] to [60:00] with each press of the button. Press the LIGHT
button to decrease the minutes to automatic power off in 1-minute steps down to
[01] with each press of the button. After setting the delay timer, press the TIMER
button to confirm.
For example, if you set the timer to [05:00], the display will show the countdown
[05:00], [04:59] ... [00:00]. When the countdown reaches [00:00], the hood switches
off automatically. The display will only show 24-hour system with blue backlight. After
30 seconds without operation, the blue backlight will disappear. (Note: The lamp is not
under control of delay timer.)
Next time, if you want to use delay timer function and you press the TIMER
without changing timer setting, the hood will automatically count time down from your
previous setting after 5 seconds.
(6) Temperature control protection
The hood automatically measures its surface temperature. When the surface temperature
of the hood rises to 61 °C, the fan automatically runs at high speed. When the FAN
button flashes, the surface temperature is below 52 °C. Press the FAN button
and the hood returns to its initial state.
to set the minutes.
to decrease the minute value in 1-minute steps down to [00]
doesn't work, the TIMER button
once, it enters for delay timer setting. The display shows
to set the minutes until automatic power off in
to increase
will not change the minute display.
is used for delay timer
button
EN
27