Klarstein Valeria Brilliant Bedienungsanleitung Seite 23

2. The cooker hood should be placed
at a distance of 65~75 cm above
the cooking plane for best effect (see
figure 1).
3. The ceiling must can bear at least
120 kg weight, and the thickness of the
ceiling must be 30 mm. Drill a 170 mm
diameter round hole in the ceiling.
4. According to the hanging board, drill 12 holes in the ceiling, see figure 2.
12 ST6*40 mm big flat screws will be used to fix the hanging board on the ceiling,
and then 8 M4*10 screws and a M4 nut with gasket will be used to connect the
angle iron into the hanging board, see pic 1. After calculating the length of the
angle iron, 16 M4*10 big flat screws and a M4 nut with gasket should be used to
connect the angle iron and another angle iron (the overlap length of angle iron can
not be less 10 cm).
Hanging board
Pipe
Angle iron
Figure 2
Figure 1
Figure 3
EN
23