Monacor Security TVCCD-436HCOL Anleitung Seite 5

®
5.5 WHITE BAL. – white balance
It serves to adapt to the colour temperature of different
light sources.
Colour temperatures of different light sources:
Incandescent lamp
Fluorescent lamp
Sunlight
Daylight with a clear blue sky
ATW
automatic adaptation with change
of illumination
AWB
automatic adaptation with smaller
range (2500 – 9500 K)
FIXED↵ MODE1 MODE4
bis
(2500 – 6500 K)
MANUAL↵
the proportion for
can be adjusted separately.
5.6 FUNCTION – further functions
FUNCTION
RETURN
CAMERA ID OFF
MIRROR OFF
DAY NIGHT AUTO↵
MOTION OFF
PRIVACY OFF
GAMMA O.45
LANGUAGE ENGLISH
RESET ↵
5.6.1 CAMERA ID – inserting the camera name
OFF
no name inserted
ON↵
name inserted
Input of a camera name:
ON↵
1) With the adjustment selected, go to the sub-
ID SETUP
menu with the middle button:
ID SETUP
CAMERA ID
CAMERA ↵ C
POSITION↵
RETURN
CAMERA ID
2) is selected. Press the middle button.
3) Select the first character with the buttons
Change to the next character etc. (15 characters
max.) with the button .
4) To delete the complete name, move the cursor with
the button or below the
right and press the middle button. To enter the new
name, move the cursor to the first character posi-
tion with the button .
5) To exit the name input, move the cursor below the
↵
symbol with the button or
dle button.
6) To define the position where the name is to appear
POSITION↵
in the picture, select the line
firm with the middle button. The name now flashes
on the screen.
7) Move the name to the desired position with the but-
tons , , and and confirm this position with
the middle button.
5.6.2 MIRROR – function of mirror-inverted picture
OFF
no mirror function
ON
mirror inversion at vertical axis
5.6.3 DAY NIGHT – switching of
day operation / night operation
AUTO↵
automatic switching between day
operation (colour mode) and night
operation (black / white mode) de -
pending on the ambient bright-
ness.
TVCCD-436HCOL
2 800 – 3 200 K
4 000 – 5 000 K
> 5 000 K
> 10 000 K
RED BLUE
and
Notes
1. The value START LEVEL must be higher than the
value END LEVEL.
2. The automatic switching does not work when the
AGC function (
when the value AGC GAIN is lower than the value
START LEVEL.
B/ W↵
COLOR
5.6.4 MOTION – motion detection
OFF
ON↵
In the submenu define above
motion detection (same as for BLC,
and above
and .
ity) for the recognition.
MOTION
AREA↵
C MOTION TH.
completely to the
IIIIIIIII
MOTION TRACE
RETURN
With a detected motion,
and press the mid-
the picture. If
releasing grid fields are illuminated for a short time.
5.6.5 PRIVACY – masking of picture areas
and con-
OFF
ON↵
To conceal picture areas which are not to be moni-
tored, four independently adjustable rectangular areas
are available. Select in each case the masking area
AREAO
( to
its visibility and size. The colour can be adjusted
together for all areas.
AREA SEL
AREA STATE
LEFT
RIGHT
TOP
BOTTOM
COLOR
RETURN
®
MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany
Copyright by MONACOR INTERNATIONAL. All rights reserved.
©
Order No. 18.2660
The value DELAY in the submenu
defines the delay time for the
switching: the higher the value, the
longer the delay time (value 0 = no
switching, day operation).
With START LEVEL the threshold
value is adjusted for switching
from day operation to night opera-
tion and with END LEVEL the
threshold value is adjusted for
switching from night operation to
day operation: the higher the
value, the lower the luminous
intensity at which the switching will
be released in case of upper or
lower deviations.
chapter 5.4) is switched off or
black-and-white mode always on
It is possible to select in the sub-
menu if the colour synchronization
Burst
signal ( ) is to be contained in
ON
the video signal ( ) or not (
B / W video signal without burst
prevents disturbing coloured noise
in the B / W picture. However, some
(LCD) monitors require in general
the colour synchronization signal
(burst) for picture synchronization.
To exit the submenu, press the
middle button.
colour mode always on
no motion detection
motion detection activated
AREA↵
the area for the
chapter 5.3)
MOTION TH.
the threshold value (sensitiv-
O3O
OFF
flashes on the top right of
MOTION TRACE
is activated (
no masking
masking activated
AREA3 PRIVACY
) in the submenu and define
area to be adjusted [0 – 3]
ON OFF
visible ( ), invisible (
left edge
right edge
upper edge
lower edge
colour (for all areas)
5.6.6 GAMMA – gamma correction
The gamma correction serves to adapt the brightness
distribution in the video signal to the non-linear human
brightness perception. A correction value of 0.45 is
suitable for the display on most monitors.
GAMMA 0.05 – 1
5.6.7 LANGUAGE of the menu
English and four Asian languages are available.
5.6.8 RESET of all adjustments
This function deletes all adjustments made by the user
and replaces them by the factory settings.
When calling the menu item, the following display
appears:
LOAD DEFAULT
YES
reset of adjustments
NO
keeping the adjustments
YES
is selected. To keep the individual adjustments,
NO
select . Confirm the selection with the middle but-
ton.
5.7 ADJUST – picture settings
CONTRAST
contrast
SHARPNESS
picture sharpness
OFF
CB_GAIN
). A
proportion of blue colour difference
signal
CR_GAIN
proportion of red colour difference
signal
RETURN
6 Specifications
Image sensor: . . . . . . . . . . CCD chip, 8.5 mm (
System: . . . . . . . . . . . . . . . PAL
Synchronization: . . . . . . . . h. 15 625 Hz, v. 50 Hz
Resolution
B / W: . . . . . . . . . . . . . . . . 700 lines
colour . . . . . . . . . . . . . . . 620 lines
Number of pixels: . . . . . . . h. 752 × v. 582
Lens: . . . . . . . . . . . . . . . . . 1 : 1.2/2.8 – 11 mm
Minimum illumination
(LEDs off): . . . . . . . . . . . . . 0.05 lux
LED range: . . . . . . . . . . . . 35 m
Shutter: . . . . . . . . . . . . . . .
Gamma correction: . . . . . . 0.05 – 1 adjustable
S / N ratio: . . . . . . . . . . . . . . > 45 dB (AGC off)
Video output: . . . . . . . . . . . 1 Vpp/75 Ω, BNC
ON
), the
Power supply: . . . . . . . . . . 12 V ±10 % /400 mA
Ambient temperature: . . . . -10 °C to +50 °C
Protective class: . . . . . . . . IP 66
Dimensions: . . . . . . . . . . .
Weight: . . . . . . . . . . . . . . . 1.2 kg
)
Subject to technical modification.
A-1163.99.02.07.2011
USER
, = 0.45
1 ⁄ ")
3
1 ⁄ – 1 ⁄ s
50 100 000
∅
154 mm × 110 mm