hanseatic MC-IF7242H1B3C Gebrauchsanleitung Seite 48

Page EN-18 Timer function
Setting the cooking time limit
5
0
1. Touch the cooking zone's slider for which
you would like to use the cooking time
limit.
The heat setting display will start to flash.
5.
0
(8)
2. Touch the timer sensor (8).
A flashing '10' will appear on the display.
A dot appears next to the cooking zone's
heat setting display.
3. Set the desired cooking time (see „Setting
the alarm time" on page EN-17).
The alarm time display begins to flash.
The alarm time display stops flashing after
a few seconds, but the dot behind the heat
setting display flashes.
Changing the cooking time limit
You can change a pre-set cooking time limit
at any time.
--
1. Touch the sensor of the cooking zone/
area for which you would like to change
the cooking time limit.
The heat setting display for the selected
cooking zone flashes.
2. Touch the timer sensor (8).
The remaining minute number will flash
for a few seconds in addition to the timer
sensor. While the display is flashing, the
setting can be changed (see „Changing the
alarm time" on page EN-17).
10
Removing the cooking time limit
1. Touch the sensor of the cooking zone/
area for which you would like to change
the cooking time limit.
The heat setting display for the selected
cooking zone flashes.
2. Touch the '+' and '-' sensors simultane-
ously.
'00' will appear on the display. The count-
down for the cooking time limit is then can-
celled.