Faults - WIKA PGW23.100.11 Betriebsanleitung

7. Faults

7. Faults
WARNING!
Physical injuries and damage to property and the environment caused
by hazardous media
EN
Upon contact with hazardous media (e.g. oxygen, acetylene, flammable
or toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic,
radioactive), and also with refrigeration plants and compressors, there is a
danger of physical injuries and damage to property and the environment.
Should a failure occur, aggressive media with extremely high temperature
and under high pressure or vacuum may be present at the instrument.
▶
▶
CAUTION!
Physical injuries and damage to property and the environment
If faults cannot be eliminated by means of the listed measures, the instrument
must be taken out of operation immediately.
▶
▶
▶
For contact details see chapter 1 "General information" or the back page of
the operating instructions.
Fault
Notes on the electronics
Connection to the IIoT
platform is not successful
26
For these media, in addition to all standard regulations, the appropriate
existing codes or regulations must also be followed.
Use the requisite protective equipment.
Ensure that pressure or signal is no longer present and protect against
accidental commissioning.
Contact the manufacturer.
If a return is needed, please follow the instructions given in chapter 9.2
"Return".
Causes
Login credentials lost.
Incorrect connection data.
Customer's firewall blocks
interfaces.
Instrument is out of range of the
gateway.
Incorrect commissioning or
impermissible, unsuitable
installation location.
Measures
Contact customer services.
Check using the supplied
connection data.
Contact the person responsible
for the infrastructure.
Observe instructions in
accordance with the operating
instructions (→ see chapter 6.1
"Mechanical mounting").
WIKA operating instructions, model PGW23.100.11