Return - WIKA PGW23.100.11 Betriebsanleitung

9. Dismounting, return and disposal
WARNING!
Risk of burns
During dismounting there is a risk of dangerously hot media escaping.
▶
Let the instrument cool down sufficiently before dismounting it!
WARNING!
Physical injury
When dismounting, there is a danger from aggressive media and high pressures.
▶
Observe the information in the material safety data sheet for the
corresponding medium.
▶
Dismount the instrument when there is no pressure.
1. Loosen the instrument with a spanner or torque spanner, using the spanner flats.
2. Screw out the instrument by hand.
3. Screw off the antenna.
4. Remove the battery.
5. Clean the instrument as required (→ see chapter 8.4 "Cleaning").
9.2

Return

Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of hazardous substances
(acids, bases, solutions, etc.) and must therefore be cleaned before being returned.
Remove the batteries before returning!
The lithium-ion rechargeable batteries or lithium-metal batteries included are subject to
the requirements of the dangerous goods law. Special requirements for packaging and
labelling must be observed when shipping. A dangerous goods expert must be consulted
when preparing the package. Do not send any damaged or defective rechargeable
batteries. Mask open contacts and pack the rechargeable battery so that it does not
move in the packaging and also prevents short circuits. Observe the different dangerous
goods requirements relative to the respective modes of transport and any other national
regulations.
WARNING!
Physical injuries and damage to property and the environment
through residual media
Residual media at the dismounted instrument can result in a risk to persons,
the environment and equipment.
▶
With hazardous substances, include the material safety data sheet for the
corresponding medium.
▶
Clean the instrument (→ see chapter 8.4 "Cleaning").
When returning the instrument, use the original packaging or a suitable transport packaging.
WIKA operating instructions, model PGW23.100.11
EN
31