Warranty - Techcon Systems Ts5322 Benutzerhandbuch

9.2 Accessories
Bench mounting kit:
PART NUMBER DESCRIPTION
918-033-000 Production master stand
918-000-012 Rod clamp
1212-000-008 Mounting rod
(These three components are needed to make a
bench mounting stand)
TE NEEDLE CHART
HUB (POLYPROPYLENE)
(Ø.170)
(.684±.025)
PART # COLOR HUB GAUGE "C" DIM.
TE714050 OLIVE 14
TE714100 OLIVE 14
TE714150 OLIVE 14 1-1/2"
TE715050 AMBER 15
TE715100 AMBER 15
TE715150 AMBER 15 1-1/2"
TE718050 GREEN 18
TE718100 GREEN 18
TE718150 GREEN 18 1-1/2"
TE720050 PINK 20
TE720100 PINK 20
TE720150 PINK 20 1-1/2"
TE721050 PURPLE 21
TE721100 PURPLE 21
TE721150 PURPLE 21 1-1/2"
TE722050 BLUE 22
TE722100 BLUE 22
TE722150 BLUE 22 1-1/2"
TE723050 ORANGE 23
TE723100 ORANGE 23
TE723150 ORANGE 23 1-1/2"
TE725050 RED 25
TE725100 RED 25
TE725150 RED 25 1-1/2"
TE727025 CLEAR 27
TE727050 CLEAR 27
TE730025 LAVENDER 30
TE730050 LAVENDER 30
TE732025 YELLOW 32
Techcon Systems is an OK International Brand
Copyright © All Rights Reserved • TS941 Rev 04/04
11
CANNULA (STAINLESS STEEL)
"A" DIM.
"B" DIM.
"C" DIM.
Ø"A" DIM. Ø"B" DIM.
1/2" 0.0610/0.0650 0.0820/0.0840
1.0" 0.0610/0.0650 0.0820/0.0840
0.0610/0.0650 0.0820/0.0840
1/2" 0.0525/0.0555 0.0715/0.0725
1.0" 0.0525/0.0555 0.0715/0.0725
0.0525/0.0555 0.0715/0.0725
1/2" 0.0315/0.0345 0.0495/0.0505
1.0" 0.0315/0.0345 0.0495/0.0505
0.0315/0.0345 0.0495/0.0505
1/2" 0.0230/0.0245 0.0355/0.0360
1.0" 0.0230/0.0245 0.0355/0.0360
0.0230/0.0245 0.0355/0.0360
1/2" 0.0195/0.0210 0.0320/0.0325
1.0" 0.0195/0.0210 0.0320/0.0325
0.0195/0.0210 0.0320/0.0325
1/2" 0.0155/0.0170 0.0280/0.0285
1.0" 0.0155/0.0170 0.0280/0.0285
0.0155/0.0170 0.0280/0.0285
1/2" 0.0125/0.0140 0.0250/0.0255
1.0" 0.0125/0.0140 0.0250/0.0255
0.0125/0.0140 0.0250/0.0255
1/2" 0.0095/0.0110 0.0200/0.0205
1.0" 0.0095/0.0110 0.0200/0.0205
0.0095/0.0110 0.0200/0.0205
1/4" 0.0075/0.0090 0.0160/0.0165
1/2" 0.0075/0.0090 0.0160/0.0165
1/4" 0.0055/0.0070 0.0120/0.0125
1/2" 0.0055/0.0070 0.0120/0.0125
1/4" 0.0035/0.0050 0.0090/0.0095
10. Limited warranty
Manufacturer warrants this product to the original purchaser for a period of one (1) year
from date of purchase to be free from defects in material and workmanship, but not
against damages by misuse, negligence, accident, faulty installations and instructions.
Manufacturer will repair or replace (at factory's option), free of charge, any component
of the equipment thus found to be defective, on return of the component. "PREPAID"
to the factory during the warranty period. In no event shall any liability or obligation of
the Manufacturer arising from this warranty exceed the purchase price of the
equipment. This warranty is only valid if the defective product is returned as a
complete assembly without physical damage. The Manufacturer's liability, as stated
herein, cannot be altered or enlarged except by a written statement signed by an officer
of the company. In no event shall the Manufacturer be liable for consequential or
incidental damages. A return authorization is required from Techcon Systems prior to
shipping a defective unit to the factory.
Manufacturer reserves the right to make engineering pr product modifications without
notice.
Techcon Systems is an OK International Brand
Copyright © All Rights Reserved • TS941 Rev 04/04
12