Removing And Installing The Lithium Ion Battery | 10 - INFICON D-TEK 3 Bedienungsanleitung

INFICON
10 Removing and Installing the Lithium Ion
Battery
074-710-P16A D-TEK 3 Operating Manual
1.
Press the eject button on the back of D-TEK 3 and remove the battery door.
2.
Remove the battery by moving the battery release tab to the side until the
battery begins to eject. Slide the battery out.
3. Re-insert the battery by first aligning the battery with the rails.
4.
Gently push the battery along the rails until the battery release tab engages.
ð Do not force the battery. If the battery does not slide freely, check the
alignment and try again.
5. Reinstall the battery door.

Removing and Installing the Lithium Ion Battery | 10

eject button
battery release tab
17 / 357