Charging The Battery - INFICON D-TEK 3 Bedienungsanleitung

5 | Charging the Battery

5 Charging the Battery
D-TEK 3 uses a rechargeable lithium ion battery that comes partially charged.
INFICON recommends charging the battery before use. Using the supplied charger or
charging cradle accessory, a dead battery can be charged to 80% in approximately 2
hours and 100% in approximately 3 hours. A full charge typically lasts about 9 hours of
operation, depending on the operating temperature. The power indicator indicates the
remaining battery percentage.
Color
D-TEK 3 can be used while charging.
12 / 357
Green
Orange
Red
% Charge
>30%
10–29%
<10%
074-710-P16A D-TEK 3 Operating Manual
INFICON