Placing The Log Set; Overview Logs And Decoration; Layout Log Set - WANDERS Tali Bedienungsanleitung Und Montagevorschriften

GB

Placing the log set

Be sure to place the logs exactly as shown in the example.
The log set can be placed after opening the door as described on page 23.

Overview logs and decoration

01 -  (1 x L, 1 x R)
03 - 
05 - 
08 - 

Layout log set

• Place the logs according to the images corresponding with your fi replace.
• The logs needs to be placed exactly according to the examples.
• Ensure that the pilot fl ame is always free of obstructions so it can lit the main burner properly.
• Ensure the the glass is fi tted before lighting the fi replace.
• When using propane be sure to place NO decoration on the burner.
When arranging the media in the fi re, it is always important to keep the mainburner (MAIN) clear from media
unless otherwise instructed. The main burner needs to have an uninterupted connection with the pilot burner
(PILOT) and with with logs of the eff ectburner that are connected to burner port 1 and 2 (BP 1 and BP 2)
When using propane make sure there is no decoration on the burner.
Please make sure not to touch the glass with your fi ngers. Finger marks burn in the glass.
Be sure that the door is correctly closed before igniting the hearth.
24
04 - 
06 - 
09 - 
02 - 
07 - 
10 - 