HERON 8896670 Bedienungsanleitung Seite 97

of incomplete mechanical equipment
Manufacturer Madal Bal a.s. Bartošova 40/3, CZ-760 01 Zlín • Company ID No.: 49433717
that the engine models listed above, as incomplete mechanical equipment in the sense of the Directive of the European
Parliament and Council 2006/42 ES are in compliance with the respective requirements of this directive for this type of
equipment and that technical documentation has been drawn up according to part B of annex no. 7 of this directive. The
equipment listed above meet the requirements of the Directive of the European Parliament and Council (EU) 2016/1628,
This declaration is issued under the exclusive responsibility of the manufacturer.
The technical documentation for the incomplete mechanical equipment pursuant to annex no. 7, section B, of Directive
2006/42 ES was drawn up by Martin Šenkýř. The technical documentation is available at the business address of Madal Bal, a.s.
The manufacturer undertakes, on the basis of a legitimate request, to provide national authorities respective information
about incomplete mechanical equipment by electronic means or in another agreed upon manner. This handover does not
affect the intellectual property rights of the manufacturer of the incomplete mechanical equipment.
The incomplete mechanical equipment must not be put into operation until a statement of compliance is issued for the
complete mechanical equipment into which it is to be installed, with the provisions of Directive 2006/42 ES.
EU approval of internal combustion engines for non-road mobile machinery (EU) 2016/1628 (see rating label on the machine):
97
Declaration
about the installation
Subject of declaration - model, product/s identification:
Petrol Engine HERON® 8896670
163 ccm, max. 4.0 kW
Petrol Engine HERON® 8896770
389 ccm, max. 9.5 kW
hereby declares
Directive (EU) 2011/65 and Directive (EU) 2014/30.
Place and date of issue of the declaration: 30/11/2018
On behalf of Madal Bal, a.s.
Martin Šenkýř
Member of the Board of Directors
EN