Remote Control - geo-FENNEL FL 510HV-G TRACKING M Bedienungsanleitung

EN
REMOTE CONTROL CHANNEL
Press this button short to select the remote control channel (ciruclarly from CH2 to CH9 = 8 channels).
The channels of the remote can be changed in order to avoid that several units on one construction site
disturb each other.

REMOTE CONTROL

When the remote control is switched on the display automatically
shows „CH2" . With the button the channels of the remote can
be selected circularly from CH2 to CH9 (8 channels are available).
If the display shows the remote has no connection to the in-
strument (the instrument is too far away, the connection is disturbed,
the channels of the remote and the instrument are not the same, the
remote is switched off). shows that the connection between the
remote and the instrument is okay.
With the on/off switch of the remote only the remote can be switched
on and off - not the instrument.
The battery status indication of the remote only shows the battery
status of the remote.
The keypad of the remote is the same as the keypad of the instru-
ment.
45