geo-FENNEL FL 510HV-G TRACKING M Bedienungsanleitung Seite 58

EN
SCAFFOLDING
Set up the laser
Set up the receiver
58
1. Attach the FL 510HV-G TRACKING M
to the scaffold clamp holder on the scaffold.
2. Switch on the laser and bring the laser beam
into coincidence with the reference nail.
1. Attach the receiver FR 77-MM TRACKING M
to the scaffold using the clamp and the adap-
ter brackets.
2. Bring the zero mark of the receiver holder into
coincidence with the reference nail.
3. Switch on the the receiver.