geo-FENNEL FL 510HV-G TRACKING M Bedienungsanleitung Seite 59

EN
Alignment
After set up of the FL 510HV-G TRACKING M
and receiver FR 77-MM TRACKING M switch
on both the laser and the receiver.
After the self-levelling process of the laser is
completed press button for 2 sec.
The tracking function is activated and the
blue LED at the receiver is blinking.
After reaching "on-grade" the blue LED at the
receiver stops blinking and the green LED
lights permanently.
This indicates that the tracking process is
completed.
The receiver FR 77-MM TRACKING M
returns into normal reception mode.
59