Eremote Control - geo-FENNEL FL 240HV Bedienungsanleitung

EN
E
REMOTE CONTROL
The remote control has the same keys as the instrument. The remote control range is 50 m approx.
If the laser is switched on the operation with the remote control can start
immediately - it is not required to switch on the remote control separately. The
instrument can be operated with the remote control only - it cannot be switched
on and off.
Note
In order to save battery power the instrument can be set on stand-by mode. The stand-by key is on the
remote control only. If the instrument is in stand-by mode it automatically switches off after 30 minutes
without use. It can be switched on again with the ON/OFF button on the instrument only.
APPLICATION
20
Stand-by