Mounting And Adjusting The Squeegee; Moving The Machine When Not In Operation - Tennant CS16 Bedienungsanleitung

machine functions. machine functions.
brush does not start rotating until the brush lever is operated. ECO function (battery powered versions brush does not start rotating until the brush lever is operated. ECO function (battery powered versions
only), used to reduce brush motor power by 20%, to activate this function, operate the "Brush lever" then only), used to reduce brush motor power by 20%, to activate this function, operate the "Brush lever" then
When the brush button is pressed, suction and detergent delivery are also enabled automatically.
powered versions only), used to reduce suction motor power by 20%, to activate this function, operate powered versions only), used to reduce suction motor power by 20%, to activate this function, operate
activated without operating the brush lever, by holding the button for a few seconds, until the LED starts activated without operating the brush lever, by holding the button for a few seconds, until the LED starts

Mounting and adjusting the squeegee

Mounting and adjusting the squeegee
Proceed as follows to install it: Proceed as follows to install it:
For perfect drying, the squeegee must be adjusted in such a way that the edge of the rear blade bends during

Moving the machine when not in operation

Proceed as follows to move the machine.
i INFORMATION i INFORMATION
EN
-
24