Technical Data; Unpacking; Attachment / Before Starting The Equipment - Scheppach HL815 Originalbetriebsanweisung

• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Release the handle button and switch off the ma-
chine prior to any operations.
• Avoid accidental starts of the machine: Do not press
the start button while inserting the plug into the socket.
• Use the tools recommended in this manual to ob-
tain the best results from your machine.
• Always keep hands away from the work area when
the machine is running.

7. Technical data

Motor V/Hz 230V / 50Hz 400V / 50Hz
Input P1 W 3000 W
Output P2 W 2100 W
Operating mode S6 40%
Motor speed 1/min
920 x 690 x
Dimensions D/W/H
1520 mm
Table height 815 mm
Working height 900 mm
210 - 550
Log length min. -
max.
Wood Ø min. - max. 70 - 400 mm 70 - 400 mm
Power max. tons*
Piston stroke 450 mm
Forward speed 40 mm/s
Return speed 100 mm/s
Oil quantity
Weight 100 kg
Subject to technical changes!
Noise
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A),
please wear suitable hearing protection.
Characteristic noise emission values
sound power level L 84 dB (A)
WA
sound pressure level L 75 dB (A)
pA
uncertainly K 3 dB
WA/pA
* S6 40%, continuous operation periodic duty. Iden-
tical duty cycles with a period at load followed by a
period at no load. Running time 10 minutes; duty cy-
cle is 40% of the running time.
Pressure:
The performance level of the built-in hydraulic pump
can reach a short-term pressure level for a split-
ting force of up to 8 tons. In the basic setting, hy-
draulic splitters are set at the factory to an approx.
10% lower output level. For safety reasons, the
22 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
3000 W
2250 W
S6 40%
2800 2800
920 x 690 x
1520 mm
815 mm
900 mm
210 - 550
mm mm
8 8
450 mm
40 mm/s
120 mm/s
4 l 4 l
98 kg
basic settings must not be changed by the user.
Please note that external circumstances such as op-
erating and ambient temperature, air pressure and
moisture affect the viscosity of the hydraulic oil. In
addition, manufacturing tolerances and maintenance
errors can affect the reachable pressure level.

8. Unpacking

Open the packaging and remove the device carefully.
Remove the packaging material as well as the pack-
aging and transport bracing (if available).
Check that the delivery is complete.
Check the device and accessory parts for transport
damage. In case of complaints the dealer must be
informed immediately. Subsequent complaints will
not be accepted. If possible, store the packaging until
the warranty period has expired.
Read the operating manual to make yourself familiar
with the device prior to using it.
Only use original parts for accessories as well as for
wearing and spare parts. Spare parts are available
from your specialized dealer.
Specify our part numbers as well as the type and year
of construction of the device in your orders.
m ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, film and small parts! There is a risk of
swallowing and suffocation!
9. Attachment / Before starting the
equipment
9.1 Fitting the wheels (Fig. 3)
• Insert the bolt (b) through the wheel (7).
• Now insert the bolt through the holes in the lower
part of the splitter.
• Now secure the bolt with a cotter pin
• Repeat this process on the other side.
9.2 Fitting the complete control arms (Fig. 4 + 5)
• Grease the metal plate
• Insert the complete control arm in the position
provided (Fig. 4).
• Guide control arm (10) into the rocker switch (7a)
(Fig. 4)
• Secure the complete control arm with a cylindrical
screw (a), two washers and a self-locking nut.
• Now fasten the other control arm on the other side
in accordance with the method described.
• Attention! Do not clamp the control arms too
tightly, they must move easily.
• Mount the safety bars (G) at the end. These are fitted
on the control arm with two Phillips countersunk-
head screws (Fig. 5)