SPORTSTECH KS260 Benutzerhandbuch Seite 19

Step 5
Make sure that the pull-up bar is really tight by gently pressing the device from all
sides with your hands.
Step 6
To secure the position of the device, slide the red locking mechanism on both ends of
the pull-up bar along the groove in the middle and snap it into place. After successful
locking, the rods are fully prevented from rotating.
After installation, check the overall stability of the assembly by carefully testing the
Step 7
device with your full weight before starting your exercises.
Optional
You can also permanently attach your device with the enclosed brackets. To do so,
mark two opposing points on the doorframe at the appropriate height level. Attach the
brackets using a crosshead screwdriver. Then you can hang the device into the brackets
that you just fixed.
19