Checking The Battery Status - Silvercrest SCP 10000A1 Bedienungs- Und Sicherheitshinweise

Connect the other end of the USB type A to micro USB
cable with adapter to USB type C
USB power supply (not included in the scope of delivery)
(see fig. B).
The current battery status is shown by LED indicator
LED indicator
1 LED flash
1 LED light up, 1 LED flash
2 LED light up, 1 LED flash
3 LED light up, 1 LED flash
4 LED light up
* This is approx percentage of power bank capacity but not
actual measurement.
The required charging time for the power bank depends
on the charging source and its output power. Fully charged
this power bank by using 5 V / 3 A charging source approx.
6.5 hours.
ATTENTION! Do not connect any device to the power
bank for charging while the power bank itself is charging.
Remove the charging cable from the Powerbank when it
is fully charged.

Checking the battery status

You can check the battery status on the LED indicator
anytime.
Lightly press the ON / OFF switch
shows the current battery status of the power bank
status
5
0‒25 %
25‒50 %
50‒75 %
75‒100 %
100 %
(USB Type A) to a
7
Power bank
capacity level*
. The LED indicator
1
:
5
5
5
for
6
GB/IE 27